Today, roofing materials are presented in a huge assortment. Monterey metal tile stands apart - the technical characteristics of the material, its appearance distinguish this type of coating from the total mass. Due to this, this material is extremely popular among developers.
Natural tiles are a traditional roofing material that has been used for hundreds of years.
However, this coating has a significant drawback - it has an impressive weight. Therefore, when building a house, this circumstance has to be taken into account by mounting a reinforced truss system.
But today there is a worthy alternative to natural tiles, not inferior in appearance, but having a much lower weight.
Monterrey metal tile can serve as an example of such a material - the technical characteristics and performance of this material are not inferior to natural tiles, and even surpass them.
The metal tile is much easier to install, allows you to create a more durable coating, produces a rich color range and is more affordable.
The light weight of the Monterrey metal tile not only allows you to build lightweight truss systems, but also greatly simplifies installation.
That's why do-it-yourself roofing work installation of metal tiles is much cheaper.
The main characteristics of the Monterrey metal tile
When choosing such a roofing material as Monterrey metal tile, the characteristics and dimensions are of interest to the customer in the first place.
As a rule, the main parameters are the width of the sheet, the height of the profile, the step with which the waves are located. Be sure to focus on the thickness of the steel sheet, which was used for the manufacture of metal tiles.
As a rule, a standard Monterrey metal tile has the following dimensions:
- Sheet width 1180 (1100) mm;
- Profile height - 25 + 14 mm;
- Wave pitch -350 mm;
- The thickness of the steel sheet is 0.4-0.5 mm.
There are other varieties of this roofing material, such as "Super Monterrey", which has a higher profile, or "Maxi" tiles, which have a larger wave pitch.
What other characteristics of the Monterrey metal tile should be considered when choosing?
- The presence of a zinc coating. This characteristic is the durability of the material. The more zinc per square meter of steel sheet surface, the greater the corrosion resistance.
- Type of polymer coating. The cheapest, but high-quality coating for modern roofing material is polyester. But today, developers more often choose more advanced coatings that significantly increase the service life of the material - PVDF, Plastisol, Purol, etc. The resistance of the material to ultraviolet also depends on the type of coating.
- The structure of the surface of the material. Manufacturers offer material of various textures. This indicator is certainly important from the point of view of building design, but, in addition, it is necessary to take into account the level of atmospheric pollution in the building area. The most popular structures are - glossy, matte, embossed, metallic.
Monterrey metal tile colors
A big advantage that Monterrey metal tiles have is the colors presented in a wide variety. Manufacturers offer a palette that includes 40 different shades.
In addition, the customer has the opportunity to order the color of his choice. Thus, with the help of this roofing material, almost any design problem can be solved.
Advice! It is advisable to immediately purchase additional elements for the roof from the same supplier.Then there will be no problem with the fact that the individual parts of the roof differ in color.
Production of metal tiles Monterrey
The manufacturer producing roofing material must have modern equipment available. For example, if you want to set up the production of such material as Monterrey metal tiles, the production should be equipped with automatic production lines.
The metal tile is steel sheets of a certain thickness, which are covered with a polymer coating.
Galvanized steel is used as a raw material, which is first subjected to passivation (coating that protects the zinc layer from oxidation), then priming. The last operation is necessary for better adhesion of the polymer layer to the steel.
After applying protective coatings, profiling is used to give the sheets the desired shape.
Today, most enterprises have eliminated almost all manual operations in the production of metal roofing material - the production of Monterrey is carried out on automatic lines.
Thus, the profiling of steel sheets is carried out by sequentially passing parts through a certain number of rolling stands. This method ensures high accuracy and stability of rolled products.
To ensure the quality of products, a multi-stage control is used, which begins to work even on the raw material preparation line.
In the manufacture of roofing material, Monterrey metal tile - GOST regulates the quality of steel, polymer coatings and work technology.
During production, the requirements of the following regulatory documents are taken into account:
- GOST 14918-80 - Galvanized sheet steel;
- GOST 23118-78 - Construction metal structures;
- GOST 24045-94 - Bent steel sheet profiles, etc.
In addition, the production of this roofing material is regulated by TU 1112-059-00110473-2002 and the international certificate ISO 9000, 9001, 9002.
It should be noted that when producing roofing material, Monterrey metal tile - ISO certificate imposes more stringent requirements than GOST. In particular, this applies to restrictions on the thickness tolerances of steel sheets and polymer coatings.
For example, the maximum tolerance for the thickness of a steel sheet in a roofing roll according to GOST is 0.05 mm, and according to the ISO certificate, this value should not exceed 0.01 mm.
Recommendations for preparing for the installation of Monterrey metal tiles
Before proceeding directly to the flooring of the metal tile, it is required to carry out a number of preparatory work, which consists in the installation of the roofing "pie".
If the roofing material is purchased in advance, then it is necessary to provide it with normal storage conditions.
For storage of roofing material Monterrey metal tile, the instruction prescribes the installation of gaskets from rails. When transferring material from place to place, it is taken by the edges along the length.
Advice! The edges of the material are quite sharp, therefore, to avoid possible injuries, it is better to work with protective gloves.
After making the necessary measurements, sheets of roofing material have to be cut manually. The manufacturer recommends cutting the Monterrey metal tile coating with scissors for metal or a power tool that excludes abrasive effects.
But cutting with a grinder is prohibited, as this will lead to the destruction of the protective layers, which will cause premature corrosion and failure of the coating.
Advice! All sawdust and shavings that form when cutting or drilling sheets of metal tiles must be carefully removed immediately, as metal chips will begin to rust after a while and spoil the look of the coating.
All sections, as well as scratches resulting from careless actions, must be immediately painted over with spray paint.
Recommendations for the installation of metal tiles Monterrey
- The crate for the metal tile is made of boards measuring 30 by 100 mm. The fastening step of the boards depends on the type of material chosen; for a standard Monterrey metal tile, the step is 300 mm.
- The cornice board of the crate is made thicker than the rest by 15 mm, and in the places where the valleys and aprons are established (at the intersection of the slopes and the exit of the pipes), a continuous crate is made.
- When covering a gable roof with a metal tile, work begins from the ends of the house. If the roof is hipped type, then from its highest point.
- If the installation is carried out from the left edge, then subsequent sheets are installed under the wave of the previous one. If from the right, then the sheets are laid with an overlap.
- The edge of the sheets should protrude 40 mm beyond the roof eaves.
- When installing a material such as Monterrey metal tile, the instruction prescribes at the first stage to fasten 3-4 sheets together, having previously strengthened the “starting” sheet with one self-tapping screw at the ridge. Then, after careful alignment, the sheets fastened together are screwed to the crate.
- The sheets are fastened together in the upper part of the wave, and fastening to the crate is carried out in the deflection of the profile.
- For fastening, self-tapping screws are used, supplemented with a sealing washer. 8 self-tapping screws are required per square meter of coverage.
- In places of overlap (overlap width not less than 250 mm), the sheets are joined according to the transverse pattern.
Advice! During installation work, shoes with soft and non-slip soles must be worn. You can step on the roofing material in places where the wave bends where the crate passes. For safety reasons, it is recommended to use a mounting belt with a safety tether.
- On the network you can clearly see how the Monterrey metal tile is being installed - a video on this topic is easy to find on thematic sites
conclusions
Monterrey metal tile is a beautiful and practical material for roofing. With proper installation, it will last for several decades, without requiring replacement and repair work.
Did the article help you?