Metal tile is one of the most optimal and profitable materials for roofing. Its appearance imitates a natural tile coating, although, of course, it is quite easy to notice the difference. But only not if such material as Andalusia luxury metal tile is chosen for roofing.
The metal tile on the operational characteristics in many respects surpasses a tile natural. But in appearance, the clay tile coating looks much nobler and more elegant. But with the advent of a new material on the market - Andalusia metal tiles - this problem was solved by itself.
The main difference between this roofing material and the low-profile Monterrey-type metal tile is that it has a hidden fastening.
That is, on a roof covered with Andalusia metal tiles, it is impossible to notice the fastening screws. In addition, such a coating is completely sealed, that is, even more reliable.
Advantages of metal tiles Andalusia
- External attractiveness of the coating. This roofing material has a high wave. Such a large pattern gives it a greater resemblance to natural tiles.
- High strength. The coating has greater strength and is able to withstand more severe loads than the coating of low-profile metal tiles. It was possible to achieve such results thanks to a higher profile wave.
- Hidden mount. The sheets are equipped with an internal z-lock, which eliminates the need for external fasteners.
- The curly edge of the lower cut of the sheet. Thanks to such an edge, the joint between the sheets of the metal tile becomes indistinguishable.
- Ease of installation. Sheets of metal tiles are light in weight and size, so they are easy to lift onto the roof.
- Savings on shipping and accessories. This type of metal tile can be easily transported even in an ordinary car, so you can save a lot on delivery.In addition, there is no need to purchase self-tapping screws in the color of the roofing, since they will not be visible anyway.
The metal tile is produced on high-tech equipment from galvanized sheet steel. To give the material an attractive appearance and greater resistance to corrosion, a polymer coating is used.
Andalusia metal tiles are produced in a variety of color shades, which makes it easy to solve any design problems.
Tips for transporting and storing metal tiles Andalusia
Manufacturers pack sheets of metal tiles in pallets and wrap them in foil. When loading this material, care must be taken to avoid sudden throws to prevent mechanical damage to the material.
Andalusia luxury metal tiles should be stored in a dry place. Sheets must not come into contact with the ground or harsh chemicals.
If the material was purchased in advance, and it will have to be stored for a long time (more than a month), it is necessary to shift the sheets with slats having the same thickness. .
If there is a need for short-term storage on the street, then the packs are installed with an inclination so that the moisture that has fallen on the surface can drain freely.
Preparatory work before installation of Andalusia metal tiles
Before the beginning roofing works it is worth checking the geometry of the roof by measuring it diagonally. If inaccuracies are identified, they can be eliminated with the help of additional elements.
Before starting the installation of the sheets, it is necessary to install the bottom strips of the valleys, the bottom aprons at the pipes, additional support boards around the safety elements.
If the project provides for the installation of a drain, then the hooked gutter and the cornice strip are also installed in advance.
Tips for installing metal tiles Andalusia
- It is forbidden to cut sheets of metal tiles with a grinder; for this purpose, you can use circular saws, metal shears or electric jigsaws.
- The chips formed during trimming must be immediately removed from the surface of the coating, otherwise it can spoil the appearance of the roof.
- If during installation a scratch has formed on a metal tile sheet, then it must be immediately painted over with paint of a suitable tone to prevent the development of corrosion. You need to paint over the sections of the sheets.
Construction of the crate
- The spacing of elements such as do-it-yourself rafters on the roof should be within 60-100 cm. It must be remembered that the greater the distance between the rafters, the thicker the boards will be required for the construction of the crate.
- By rafters waterproofing is laid (freely, without tension), then bars of the counter-lattice are nailed on top (minimum section of the bar is 30 × 50 mm). Lathing boards are stuffed onto the counter-lattice (the minimum section of the boards is 30 × 100 mm). The spacing of the boards of the crate depends on the profile of the metal tile.
- Since the first row of sheets is laid on the initial bar (a special bracket installed around the entire perimeter of the roof), there is no need to use a board with a large section as the initial row of the batten.
Laying sheets of metal
- In the event that the line of the roof eaves is horizontal, the installation of the Andalusia metal tile is very simple: the sheets without adjustment and additional operations will be installed parallel to the line.
- Eaves slats and brackets for installing gutters are attached to the crate.
- Mount the initial strips, taking into account the fact that the material will form an overhang with a length of 40 mm.
- With a rectangular slope, it is more convenient to start installation from the lower corner of the right side of the roof.
- There are several schemes according to which the sheets are stacked. Most often they are mounted horizontally, moving from right to left. In some cases, it is more convenient to lay diagonally, and in case of strong wind loads, offset laying is used.
- The sheet is fastened using self-tapping screws, which are screwed into the upper part of the sheet into a special mounting hole. The fastener remains invisible, as it is hidden by the figured bottom edge of the sheet above. The sheets are securely fixed to each other with a Z-Lock.
conclusions
Andalusia metal tile is a new generation of roofing materials, with the help of which it is quite simple to create a beautiful, durable and strong roof covering.
Did the article help you?