Slate is a fairly inexpensive roofing material, the use of which allows you to avoid additional costs for the arrangement of sound and heat insulation. In this article, colored wave slate will be considered - its characteristics, main advantages and method of installation.
Slate allows you to provide comfortable living, even if the house does not have an attic.
Colored wave slate, which is not only an environmentally friendly material, but also has low thermal conductivity, has recently gained particular popularity in roofing. In addition, this material is not subject to combustion, which improves the fire safety of the house.
The construction of the roof is the final stage in the construction of any house.At the same time, the roof should be distinguished not only by reliability and safety, but also by an aesthetically attractive appearance, on which the appearance of the entire building depends.
In this regard, an excellent solution for roofing is colored wave slate - an environmentally friendly material made on an asbestos-free or fiber-cement basis.
The roofing material, which has a smooth surface, in appearance is a competitor to ceramic tiles, and its cost is much lower than the cost of another fairly common material for roofing - metal tiles.
In addition, wave colored slate differs from metal tiles in simplicity and ease of installation, more effective protection from heat and cold, noise resistance and long service life.
Sheets of this material can have either the color of gray slate or any other color. Their staining is carried out in a technological environment. For this, weather-resistant and light-resistant paints made on the basis of acrylic dispersion are used.
In addition to giving an aesthetic appearance, the layer paints for slate allows you to increase the life of the roof, covered with colored slate, up to one and a half times.
The rather low cost of colored slate allows it to be used when covering the roofs of such buildings and structures as residential and country houses, garages and various outbuildings.
If the roof of a residential building is covered with colored slate, then it is recommended that the rest of the buildings on the site be covered with the same material so that the harmony of the site is not disturbed.
If you compare colored slate with materials such as ondulin or metal tiles, you will notice that modern technologies also make it possible to cover it with special coloring compositions.
Most often, bright rich colors (red, green, brown, blue, etc.) are chosen for colored slate. This allows you to significantly improve the appearance of the finished roof, and also increases the water resistance of the material.
Important: slate staining also serves as additional protection against asbestos dust emissions harmful to humans.
Advantages of painted slate
Consider the main advantages of colored slate:
- Low cost and easy installation. Staining additionally increases the protection of slate from negative external influences, and also improves its attractiveness. Various color shades make it possible to build houses that are in harmony with the surrounding landscape, the construction of which is several times cheaper than in the case of tiles or tin with a fairly simple procedure for installing the coating.
- Slate is highly resistant to low temperatures and can be used in adverse climates, so this material is used even in construction in the Far North. Slate roofing provides reliable protection of buildings for a rather long period: in case of proper installation and compliance with operating rules, the service life of slate reaches sixty years, during which the interior of the house will be reliably protected from various precipitation and winds.
- Flat colored slate has a very wide range of applications.This material can be used not only for roofing, but also for exterior walls of any buildings and structures, as well as for the construction of fences.
- The process of erecting a slate roof is quite simple and convenient, unlike materials such as tin or slate, which require the involvement of qualified specialists. For the installation of slate, only the desire and ability to use a hammer is enough.
- This material is also able to maintain a low temperature on the inner surface even in the hot season. It meets all the requirements and operating standards for the construction of attic and summer cottages.
- Slate has high sound insulation, which allows you to protect the interior of the house from the noise of hail or rain, which further increases the comfort of living.
- Finally, slate is a completely non-combustible material, which allows you to protect the roof from fire even in the event of a fire in neighboring buildings or areas.
Features of mounting colored slate
Both colored and plain slates are usually laid at an angle of 25 to 45 degrees.
Important: a steeper slope angle increases not only the water resistance of the roof, but also the consumption of building materials, and also complicates the work.
The sheets are laid on a crate made of wooden beams nailed across the rafters.
According to the instructions, each laid sheet of colored slate should be supported by at least three beams, in accordance with which the step of the crate should be chosen.
In the case of using sheets of a standard size (1750x1130 mm), the distance between the bars of the crate should be 75-80 cm.
Installation of colored slate requires a small set of tools, as well as the following consumables:
- Staples;
- Linings;
- Slate nails;
- Tightening tape.
Useful: linings provide a snug fit of slate sheets both to each other and to the bars of the crate.
In difficult places, such as skates, overhangs and various openings in the roof, the crate should be covered with boards. Sheets are stacked from the bottom up in order, taking into account the shift in one wave. The arrangement of the sheets is leveled with a cord, and the overlap between the rows should be 12-14 centimeters.
Useful: the overlap can be increased so as not to cut the sheets once again, but you should not reduce it.
Such advantages of colored slate as environmental safety, simplicity and low cost of installation, long service life, etc. make this material quite attractive for roofing.
This is also facilitated by the aesthetic appearance and a wide range of colors that allow you to give the roof of the house any shade, embodying the most daring design solutions.
Did the article help you?