The range hood is known to be a very important part of the kitchen, especially in our time. During cooking, during the processing, various substances are formed, such as combustion products, fumes, odors, and smoke. In the presence of a hood, the room is cleared of these harmful substances.
Varieties of pipes
Usually the hood hole is located above the appliances that are used in cooking, but in rare cases it can even be located on the opposite wall of the kitchen. This arrangement causes a huge number of problems when installing the hood, in which case the installation of a special pipe is required, which is used to connect ventilation and household appliances. Material, section, and also the shape of the pipe, this is their difference from each other.Corrugated and plastic versions of such pipes are the most common today. Pipes made using new technologies have a number of specific advantages:
- minimum noise level during operation
- all combustion products, odors and vapors go straight into the shaft, and do not remain on the pipe walls in the form of fatty deposits
- there is no resistance during operation
Attention! An important detail when installing plastic pipes is the exact calculation of the dimensions of all parts, taking into account the connecting elements.
Ceramic tile
The decor of the box in the kitchen can be done both with tiles and with the help of wooden panels. Ceramic tiles are very easy to clean, and given that ventilation is most often installed above areas such as the cutting table, stove and sink, then lining the box with tiles is the best solution.
Plaster
This decor is most suitable for the classic style. With the help of plaster, you can stylishly decorate the box, as well as, if necessary, level the walls. Decorated plaster is most often used in modern design solutions. Applying it without specialists is quite easy, because the method of applying it is very simple.
PVC panels
The cost of PVC panels is quite comfortable, they have high-quality material, and there is also no need to level the wall, if necessary. Therefore, the installation of such panels will be an excellent solution when arranging the box. This method will be very practical for those who care about every centimeter of space.
Corrugation characteristic
All that is needed to install such an air duct is to connect one end to the hood and the other to the ventilation. Therefore, this method is the easiest to install.The ends of the pipe are securely fixed with metal clamps. If the same hood parameter is less than the cross section of this pipe, then a tight connection of the clamp and adapter will be required.
You can also use galvanized pipes, they will be a good alternative in this case. Galvanized pipes do not lend themselves to metal corrosion and, moreover, they well remove all the fumes that have formed during the cooking process. Air ducts by their design can be flanged, without flanged and welded. When purchasing a product, it is important to pay attention to all the nuances. For example, the fact that at the exit from the corrugation the pipe has the shape of a square, and to the adapter it turns into a round one.
Did the article help you?