Accurate measurements can be made using a metal tape measure. In this regard, it will be much more effective than a centimeter tape. To correctly calculate the required length of the curtains, the following parameters should be taken into account:
- cornice length;
- splendor coefficient, that is, how much the material takes in the assembled state;
- the allocation of several reserve centimeters for processing the sides.
The cornice is considered to be mounted correctly if it is 20-25 centimeters longer on all sides of the window opening. With such an installation, in order to obtain the maximum possible illumination of the room, the curtains can be moved apart so as to reveal the entire window.
Taking measurements
In order to determine the most optimal dimensions of curtains, you first need to take measurements. The first step is to decide on the width and length of future curtains, and the rest of the parameters will already depend on them.Measurements should be started only after the desired cornice is selected and installed. There are different options for cornices, and if some are attached to the wall, then others to the ceiling, but whichever one is chosen, its length must necessarily be greater than the width of the window. If the installation needs to be done in a bedroom or a rest room, then it is allowed to select a cornice for the entire width of the wall, which in turn will well emphasize the window area. As for other rooms, there the cornice should also exceed the width of the window opening, but within 20-30 centimeters.
This is necessary so that when the curtains are shifted, the sun's rays can safely enter the room. In this case, the only exception is the kitchen, since translucent curtains are usually hung in it, and the length of the cornice often does not exceed the width of the window.
Important! If you need to install a cornice as quickly as possible, then preference should be given to a new type of cornice. Their feature is adjustable length. This means that if necessary, the acquired cornice can always be lengthened or shortened.
Before taking measurements, it will be useful to decide which curtains you want to purchase. It’s just that the length and width of the desired material directly depends on the type of fabric, the number of layers in the finished product, as well as on the type of attachment. To measure the width of the curtains, you can use a tape measure or a soft centimeter tape. Measurement in this case should be carried out from the first fastening to the last. Measuring the length of the curtain should start from the cornice or from those fasteners that have been selected.
Nuances in measurements
Usually a roll of light fabrics like organza, tulle or veil reaches a width of up to 280 centimeters. If the height of the mounted curtain fits the above figure, then when buying it will be easy to count the necessary running meters. As for curtain fabrics, everything is somewhat more complicated due to the different options for the width of the rolls. So, the smallest are 140 centimeters, and the largest are 300. if the length of the curtain does not exceed the width of the roll, the footage is determined in the same way as in the case of light fabrics. In the event that the length of the curtain exceeds the width of the roll, you will have to sew several pieces of fabric to get one suitable curtain.
It will cost more. The number of canvases needed ultimately also depends on the assembly factor and on what pattern should be on the material. The canvases will need to be connected so that the pattern matches, and this may require additional centimeters of fabric. The larger the print on the curtains, the more meters you will have to buy in relation to the height of the repeating pattern. And this applies to every piece. So, for example, if the length of the curtains is 5 meters, and the height of the pattern is 30 centimeters, then the required length of the fabric is considered as follows: 5 m. + 30 cm * 2 = 5 m. 60 cm.
Did the article help you?