In the process of active use, soot gradually accumulates on the sole of the iron, which must be cleaned regularly to avoid damage to things during ironing. There are publicly available methods to deal with this problem.
Cleaning a burnt soleplate with vinegar
This method is relevant for Teflon and ceramic coatings. Vinegar allows you to remove scale on internal surfaces and clean the soleplate of the iron from persistent deposits.Before starting the process of restoring the normal state of the iron, it is necessary to prepare a solution by mixing vinegar and clean water in a container in a ratio of 1 to 1 so that this liquid can be used in the future. Then, in this composition, you need to moisten a regular rag and begin to gently wipe the carbon deposits from the surface.
After processing the main part, you can start cleaning the steam holes with cotton swabs dipped in the available solution.
Important! During this procedure, the household appliance must be cold.
Cleaning the soleplate with salt
- First way. It is necessary to raise the temperature of the iron to the minimum value, fill the “pouch” of cotton fabric with salt, and then rub the sole.
- The second way. It involves the implementation of the previous paragraph, using gauze folded in several layers instead of fabric.
- The third way. It is required to pour a small layer of salt on a sheet of foil, and then put an iron on it, preheated to the limit.
How to remove carbon deposits from an iron with baking soda
To do this, you need to take 2-3 teaspoons of ordinary baking soda and add it to a bowl with vinegar (9%) or clean water. The result should be an abrasive paste, into which you will need to dip a sponge or cloth to rub the surface with it to a shine. In this case, the iron should be slightly hot.
Teflon and ceramics - gentle cleaning of the coating
In hardware and some hardware stores, you can buy a special cleaning stick containing ammonia or appropriate acids. Before processing, the device must be placed on a comfortable surface and heated to a temperature of about 150 degrees Celsius. After that, you need to lightly walk on the sole.As the pencil melts, the plaque at the point of contact will peel off. After processing, characteristic stripes will remain on the iron. They will be removed after a short ironing of a clean rag or other fabric. The substance must not penetrate into the steam openings of the appliance. And people who have problems with the respiratory system are not recommended to inhale fumes from a heated pencil.
What is the best way to clean an iron
Modern expensive models of household appliances need a particularly careful attitude, so when working with them, you can not use abrasive products, including soda. Salt is suitable for processing irons made of strong steel, but abuse can damage even such a surface. To prevent the formation of soot, after each ironing, clean the sole of the iron used with a special pencil or a cloth moistened with a vinegar solution.
What else to consider
Sometimes it happens that the fabric burns during ironing, leaving a mark on the iron. If this happens, you should immediately moisten a cotton rag and apply it to the stain. Strong temperature changes are sometimes used to combat soot. Hard brushes and any metal sponges cannot be used when working with even the most durable soleplates of irons. Less scale will form inside the iron if the liquid is removed from it immediately after ironing. An even more effective method is to use filtered water.
Did the article help you?