Many modern tire centers have long introduced the repair of car rims into their services. This is not a small list of services, as it might seem at first glance. Experienced workers often suggest repairing chips and cracks, restoring geometry, correcting axial or radial misalignments, and building up lost disc parts.
In what cases is it used
Argon welding for the repair of car rims is used in the most difficult cases and with significant damage. Such cases occur if, for example, the wheel of a car in motion falls into a deep hole, crashes into a curb, or ends up in an accident. Some deformation of the discs can occur with prolonged use, for example, if the car has been driven on them for more than 100,000 km. To eliminate this situation, it is necessary to undergo maintenance of the car on time.This will help to remove small cracks and chips from the discs, which can lead to more significant problems in the future. In such cases, the disks are restored using argon welding. This method is chosen because of its reliability and long service life. When performing work, specialists carry out the seams so carefully that they are not visible against the background of the main part, and many consider them to be one whole. You should also know that after repair by argon welding, the disc can be used without speed limits, which indicates its strength and durability.
What are the advantages of the method
The technology of argon welding has many advantages:
- disks contain highly active metals, so that they do not oxidize and do not change color and properties, this welding method is chosen;
- argon also has protective properties for welded metals, as it is considered inactive chemically, so metals are not damaged by welding, heating;
- when using argon welding, a film is formed that merges with the disk into one whole, which is the cleanest and safest type of welding.
The resulting seams are considered a feature of argon welding. They are durable and of the highest quality. Therefore, it is suitable not only for welding car rims, but also for car frame parts. With further processing of the seams, they are very carefully washed and removed. Even a professional expert will not be able to determine that welding has been applied. With detailed inspections, it will be impossible to notice welding with the naked eye. For a successful welding process, a qualified specialist must be behind the machine. Experience in such a business will be decisive for obtaining an excellent result.Each master must undergo special education and training in order to professionally carry out re-geometry, repair chips and scratches on the discs, as well as leveling the edges. Experience will reduce the time spent on work.
Did the article help you?