Options for finishing the facade of the building using siding
A good option for finishing the facade of a building is siding. The building material has a wide variety of types and, after installation, it protects the walls well from the influence of an aggressive external environment. Since such sheets are frame, a heat-insulating insulation layer is easily laid under the skin.
Material Features
Siding refers to the outer skin. These are facade panels with which you can veneer all parts and elements of the building. A feature of this material is its high physical and technical parameters, surpassing any other types of exterior wall decoration.
The uniqueness of siding lies in the fact that its surface can imitate expensive types of materials:
- stone;
- tree;
- brick.
Panels with a length of 3 m are produced. Their installation is carried out on a metal frame attached to the facade of the building. If necessary, the facing material can be fastened with self-tapping screws to a wooden crate. For this, there are special mounting shelves in the panel. Between themselves, the lamellas are connected by a lock according to the principle of a tongue and groove.
Manufacturers produce many varieties of siding, examples can be found on the company's website. For facade cladding, vinyl, metal and fiber cement options are more often used.
Vinyl finish
The popularity of vinyl siding is due to its low cost and long service life. They can decorate houses in the private sector, country cottages and country houses. In addition, they are faced with large industrial facilities. The benefits of vinyl siding are as follows:
- does not fade under the influence of sunlight;
- immune to the effects of precipitation;
- has sufficient strength;
- has a long service life of up to 50 years;
- has a large selection of colors.
The stability of the structure of the material is given by titanium dioxide, which is located in the upper layers of the material. Its content is 10%. The presence of the element enables the siding to resist ultraviolet rays.
Metal variant
The basis of the metal type is a galvanized sheet on which a polymer coating is applied on top. Steel profiled sheets are produced in a different number of shades, which is a significant advantage.This is ensured by the presence of powder paint on the surface, which comes in different shades.
The advantages of metal siding are expressed in the following:
- resistance to high and low temperatures;
- strength;
- duration of operation;
- the possibility of carrying out repairs in case of damage to individual places;
- mold does not form on the surface of metal sheets.
The presence of a protective polymer layer prevents the metal from corrosion.
fiber cement siding
The basis of this type is high-quality cement, to which a cellulose component is added. Externally, it can be made so that it will imitate a smooth surface or wood, which gives it a special beauty.
The advantages of this type are as follows:
- resistance to deformation;
- high strength;
- long service life, up to 50 years;
- good moisture resistance;
- high resistance to mechanical stress.
- the possibility of carrying out registration work.
The material has retained its attractiveness for 20 years.
The option of finishing the facade is selected taking into account the features of the structure and the region where the building is located. In addition, much here depends on the tastes and capabilities of the owner.
Did the article help you?