Fuel for furnace Buleryan
you may also be interested in cellular polycarbonate, which is used for sheds, greenhouses, balconies, you can choose and buy it
Like any heating device, the Buleryan convection type oven has positive and negative reviews. However, quite often, negative reviews are based simply on the inability to use the heater. You can often find negative reviews based on the prohibition of using coal stoves for operation. The fact is that when it is burned, a large amount of soot, soot and carbon monoxide is formed. These substances can accumulate in the room and chimney. After a certain time, they reduce traction, which causes poor performance of the device. Before you buy a Buleryan stove, you need to familiarize yourself with the characteristics of the fuel.
On our site you can also choose the right buleryan for your building.
Basic requirements for fuel for convection oven Buleryan
Most often, wood is used for the operation of the device. The main requirement that all firewood must meet is the moisture content. The optimum moisture content of firewood should not exceed 20%. If you are preparing firewood yourself, they must lie in the open air for at least a couple of months.
To operate the Buleryan stove, you can use a wide variety of tree species. Beech, oak, ash, mountain ash have the greatest ability to release thermal energy. Fruit trees are not able to emit a large amount of heat, but when burned, a pleasant aroma is released. It is better to refuse the use of coniferous trees, since an excessive amount of soot is released during combustion. It will reduce draft in the chimney. To prevent the accumulation of soot and soot on the inner surface of the pipe, it must be systematically cleaned. Cleaning is carried out mechanically or chemically. The mechanical method involves the use of a hard brush. The chemical method was invented a few years ago. Specialized solutions are sold in heating stores that can destroy soot and soot growths.
Peat briquettes are considered auxiliary sources of thermal energy for Buleryan long-burning furnaces. During the production process, excess liquid is removed from them. Accordingly, they will have an optimal level of humidity. In addition, peat briquettes emit a significant amount of thermal energy during their combustion. The only drawback of this type of fuel is its rather high cost. Sawdust, bark, paper and cardboard are considered alternative fuels.However, they have a low level of thermal energy release.
Did the article help you?