Folding shower enclosures add extra space to the bathroom. During the idle period, it can gather against the wall. Shower cabins with a folding mechanism are quite an interesting solution. This piece of plumbing in the usual configuration takes up a lot of space in the bathroom space. Many owners of a small room tried to choose not very large products so that there was room for free passage and space for something else. But during the period of water procedures, it is not very comfortable to fit in a cabin that has parameters of 60 * 60 or 70 * 70.
What is the difference between folding showers
In folding shower cabins, the doors can be either single or double. They fold to the walls in the center, so that there is free additional space. The most popular are two folding doors.If the cabin is placed in line with the bathroom, then you can purchase a single door. Such equipment is much easier to clean. Many booths for taking water procedures are installed in the corner. They buy whole halves of the booth (the width of each of them can be different) or only walls that fold in half.
In addition, some structural elements can be ordered at the discretion of the owner of the premises, based on individual dimensions. Thanks to this solution, the device will fit into the space as well as possible. The walls can be made of colored panels or glass. Profiles can be coated with a specially designed composition that prevents the deposition of limescale. This coverage may be included in the cost of the equipment or may be purchased at an additional cost.
For glass surfaces, compositions are used, the advantages of which are:
- Increased level of abrasion resistance.
- Easier and more convenient cleaning. At the same time, the number of household appliances used is minimal.
- You can clean up less frequently.
- Resistant to the influence of chemical compositions.
- Helps reduce the adhesion of deposits and dirt.
- The flow of water is faster.
There is a lifting mechanism on the doors. In addition, there is a high level of tightness, which is ensured by a horizontal lining and a magnetic strip. The folding of the doors is flush with the walls. Thanks to this, the width for the entrance is sufficient. The thickness of high-quality tempered glass is 6 millimeters. When choosing, you should also pay special attention to the method by which the shower will be attached. The cabin can be either rectangular or square.The system is quite tight due to the presence of a seal between the fixed parts and the door.
Cabin pallet
Folding type shower cabins are most often installed on the floor. But in some situations, a special flat type pallet is used. It should be placed flush with the floor line.
Did the article help you?