this is a specialized climatic equipment, which is designed for air conditioning, as well as maintaining specific climatic air conditions in rooms for various purposes. Includes at least three components.
More about multi-split air conditioning system
There is always one compressor and condenser unit outside, mounted outside the building, that is, on the facade of the room. At least 2 internal evaporator modules, and they are responsible for heating and cooling the air mass.
When installing this air conditioning system, one should take into account both the set of parameters of all devices and the technical abilities of each.
The main distinguishing feature of the module is its power.The efficiency of the 1st device is required to guarantee the normal operation in the same climate mode of all devices inside.
Usually, it is quite difficult to calculate without help, because the calculation is done by the differentiation cabinet. However, for an approximate establishment of the power rating, one should simply sum up the coefficients of each block located inside. The amount purchased must be equal to the power that the external unit has.
However, the result of this calculation will be conditional, since it does not include such values: cold performance; activity mode; area of rooms; climate and its features of the region.
At the same time, models of immediately assembled systems are available. In them, the efficiency of the block outside assumes the load of a fixed number of modules inside.
After purchase, the unit can be installed immediately, there is no need for any calculations. The advantage of stacked structures is the ability to choose a different type of air conditioner for any room. This can be important when the purpose of these rooms implies the presence of different volumes and purposes of the conditioning process. Under such circumstances, the development of a system plan is best left to specialists.
The internal devices of this system, in principle, are no different from the usual ones. The difference is only in their number and the ability to use a number of modules simultaneously within the same network.
Did the article help you?